|Sheath Material||Iron, Steel, 304 Stainless steel, Aluminum, Zinc coated steel|
|Watt Density||Up to 100 W/in2|
|Voltage||Up to 600 V AC available|
|Operating Temperature||Up to 1200 °F or 650 °C|
|Length||5 ½ to 48 inches|
|Width||1 ½ inch|
Strip heaters, commonly called component or clamp heaters, based on the principle of convection air heating, use surface area to transfer heat effectively. Using most advanced heat technologies, strip heaters are an outstanding industrial heating product. It comprises of a heating element, a protective sleeve or sheath, and mounting hardware and can be clamped or bolted onto objects or solid surfaces. A coiled nickel chromium element wire is placed in the center of the heater. Suitable to work in 260 degree C temperatures, magnesium oxide is used for increasing efficiency. Temperatures can be controlled by using a temperature controller such as a thermostat. When using strip heaters, proper sheath material for resisting rusting or oxidation and suitable watt density of the element should be selected keeping in mind the application. These can be shaped and sized according to the use. A moderately inexpensive way of heating, strip heater is a tremendous solution to meet any budget.
Compressed under high pressure for excellent heat transfer
Customized to easily fit into applications.
Centered in the heater to assure uniform heat
Options With Strip Heaters
Offset terminations, Parallel terminals, terminal at each end or lead wires available
Available mounting tabs with holes, slots or without tabs