Business Type : Manufacturer, Exporter, Supplier, Retailer
|Temperature Range||250 °C to 1200 °C|
|Stability||±0.1°C at 250°C, ±0.2°C at 700°C, ±0.3°C at 1200°C|
|Radial Uniformity||±0.20°C at 250°C, ±0.24°C at 700°C, ±0.36°C at 1200°C|
|Insert OD Dimensions||37mm|
|Method of Control||Self Tunned PID Controller|
|Heating Time||60 Min|
|Cooling time||150 min(1200⁰C to 250⁰C )|
|Resolution||0.1⁰C up to 999⁰C|
|Display||Lcd,⁰c or ⁰f User-selectable|
|Size (HxWxD)||405(H) x 205(W) x 285(D)|
|Power Requirements||230 VAC, 1.5 KW(50Hz)|
|Computer Interface||Rs- 232|
|Calibration||Accredited Calibration Certificate Provided|
|Environmental operating conditions||0 ⁰C to 40 ⁰C,0 % to 90 % RH(non-condensing)|
|Specification valid in environmental conditions||13 ⁰C ..... 33 ⁰C|
|Data logging (CALsys 1200 Autocal)||Data logging facility with logged data export to computer through LAN port (optional USB)|
Preferred Buyer From
The CALsys 1200 Autocal is an automatic temperature calibration system for the Thermocouple and RTD's.
The system consists of Temperature bath and PC software, which together contribute to the whole cycle of auto-calibration process.
The system accepts 4 channels, 4 Thermocouples or 4 RTD's.The connection for these channels through special type of locking connectors. The channel configuration can be done with LCD display via touch screen keypad.
The thermocouple microvolt & RTD ohm reading for each channel is monitored with CJC compensation. After the calibration process complete the PC software generates a report of actual calibrated values for the inputs.
Input (CALsys 1200 Autocal): Four Channels (One master and three test sensors), high-quality LEMO connector suitable for both T/C (J, K, N, T, R, S, B type) and Rtd.
Software (CALsys 1200 Autocal): The calibrator should be provided with software for data recording (Manual Mode) and Test Certificate generation in Auto Mode.