FASTCAL 3000 High Temperature Black Body Source

Business Type Manufacturer, Exporter, Supplier, Retailer, Wholesaler
Wavelength 1000 nm or 1600 nm (Pyrometer)
Cavity Temp. Accuracy ± 0.25 % of set temperature ±1°C
Temperature Stability ±1°C
Click to view more

Preferred Buyer From

Location Worldwide

Product Details

0.995 ±0.005
CE Certified
Closed end graphite tube Length -292mm Heated Length - 127mm
Heating Aperture/Cavity Diameter
Graphite tube with argon gas purge diameter 25mm
Purge Gas
Dry Argon gas flow with 7-10 LPM
Heating Time
Approx 5 Minute from ambient to 3000°C
Controlling Sensor
Method of Control
PID controller Eurotherm make(Option - HMI & Data Logging)
Remote Controller
Set Point control and temperature monitoring by RS-232/Rs-485
Ambient Temperature
0°C to 50°C
230 VAC ±10°C 50Hz (Three phase/Two Phase/Single Phase)
1700mm(H) x 900mm(W) x 1200mm(D)
300 Kg

FastCAL 3000 is a high-temperature blackbody source with a capacity to produce high temperature using high emissivity emitter(graphite tube) and at the same time stabilize at the required temperature within a few minutes.

It is mainly used to calibrate non-contact temperature sensors. Step change in temperature is achievable within seconds. The graphite tube has an emitter diameter of 25mm (1.00") and emissivity of +0.995 ±0.005. Target temperature is sensed by a noncontact temperature sensor/Pyrometer which gives feedback to PID controller to regulate the cavity temperature precisely to the desired set points. Remote set point is achieved via RS-232 C communication port.

All safety features to protect equipment and operator are easily accessible.

Key Features:

  • Water flow failure
  • Increase in water temperature
  • Argon gas flow failure
  • Over current

Yes! I am interested

Looking for "FASTCAL 3000 High Temperature Black Body Source" ?

Explore More Products

Raise your Query

Hi! Simply click below and type your query.

Our experts will reply you very soon.

WhatsApp Us