High Temperature Black Body Furnace

CALsys 1200BB calibration source is a highly stable standard black body furnace for calibrating noncontact IR thermometer for the wide temperature range of 300 to 1200°C. The unique feature of this black body furnace is large temperature-controlled black body target with a diameter of 40 mm and 85mm which offer large view area for IR thermometer. The emissivity of the target is 0.99(±0.01).The temperature of the calibrator is set and controlled by a self-tuned PID controller with automatic super fine adjustment.

Key Features:

• Wide Operating Range (300 to 1200°C)
• High Stability
• PC interfacing
• Simple to use and cost-effective
• Sighting tube

Accessories:

• NABL accredited calibration certificate - 3 point
• Software - Cal Soft including for setting bath temperature and monitoring the PV. graphical representations of PV/TIME with 2 hours data logging.
• Operational Manual
• Master Pyrometer (Optional)

CALsys 1500BB calibration source is a highly stable standard black body furnace for calibrating noncontact IR thermometers for the wide temperature range of 500 to 1500°C. The unique feature of this black body furnace is large temperature-controlled black body target with a diameter of 40 mm and 85 mm depth which offer large view area for IR thermometer. The emissivity of the target is 0.99(±0.01). The temperature of the calibrator is set and controlled by a self-tuned PID controller with automatic super fine adjustment.

Key Features:

• Use of Silicon Carbide Spiral Rod Heaters
• Wide Operating Range (500 to 1500°C)
• High Stability
• PC interfacing
• Simple to use and cost-effective
• Sighting tube

Accessories:

• NABL accredited calibration certificate - 3 point
• Software - Cal Soft including for setting bath temperature and monitoring the PV. Graphical representations of PV/TIME with 2 hours data logging.
• Operational Manual

CALsys 1700BB calibration source is a highly stable standard black body furnace for calibrating noncontact IR thermometer for the wide temperature range of 500 to 1700°C. The unique feature of this black body furnace is large temperature-controlled black body target with a diameter of 29 mm which offer a large view area for IR thermometer. The emissivity of the target is 0.97(±0.01). The temperature of the calibrator is set and controlled by a self-tuned PID controller with automatic super fine adjustment.

Key Features:

• Use of Molybdenum Disilicide Heaters (MoSiO2)
• Wide Operating Range (500 to 1700°C)
• High Stability
• PC interfacing
• Simple to use and cost-effective

Accessories:

• NABL accredited calibration certificate - 3 point
• Software - Cal Soft including for setting bath temperature and monitoring the PV. Graphical representations of PV/TIME with 2 hours data logging.
• Operational Manual

FastCAL 3000 is a high-temperature blackbody source with a capacity to produce high temperature using high emissivity emitter(graphite tube) and at the same time stabilize at the required temperature within a few minutes.

It is mainly used to calibrate non-contact temperature sensors. Step change in temperature is achievable within seconds. The graphite tube has an emitter diameter of 25mm (1.00") and emissivity of +0.995 ±0.005. Target temperature is sensed by a noncontact temperature sensor/Pyrometer which gives feedback to PID controller to regulate the cavity temperature precisely to the desired set points. Remote set point is achieved via RS-232 C communication port.

All safety features to protect equipment and operator are easily accessible.

Key Features:

• Water flow failure
• Increase in water temperature
• Argon gas flow failure
• Over current